Google Voice, which lets users consolidate all their phones under one number, archive your texts and voicemails, and much, much more, is two things to most people: vaguely promising, and totally confusing. Here’s how to make the switch, in plain English.

The Pitch

It doesn’t really help to describe Google Voice in terms of what it is—a bizarrely fragmented hodgepodge of different telecom and internet technologies, drawn together by Google—so you just have to start with what it does. In short, it can completely change how you use your phones, more or less for free.

• It can give all of your phones the same number for incoming calls. Google will assigned you a new, Google Voice-specific phone number for free, which you can forward to as many phones as you want. What always drives the point of Google Voice home for people is when I have them call my number, which causes three of my phones to ring at once. You can keep this number forever, too, without ever having to worry about porting it from carrier to carrier.
• It can give your phones the same outgoing number as well, with which you can make free domestic calls (well, sort of—more on that later), and very cheap international calls. Since Google Voice routes your calls through their phone system, they can connect you directly to cheap VoIP services to the rest of the world. It seems like you're just making a regular call, but behind the scenes you're doing something more akin to Skyping. End result: money saved.
• You can send and receive unlimited text messages for free. To make things even better, they’re all all archived in your online Google Voice account, where they’re fully searchable.
• It's got the best voicemail system in the world. Leaving a message at a Google Voice number is nothing like leaving your voice on a regular voicemail service—that is to say, it's not like sending your voice into a barely accessible technological horror pit where it might get listened to, but will probably be ignored. No, Google Voice is different: It stores your messages online, and converts them to text (which can then be sent to you as an SMS or an email). You can archive, forward, delete or save these messages from a simple interface on your phone or computer. Think of it as Gmail, except with voices. Plus, it's flexible in lots of little ways—you can change your voicemail greetings on a per caller basis, for example, or opt to listen to voicemails as they're being recorded.
• This voicemail system isn't just for Google Voice numbers, either—you essentially replace your carrier voicemail with Google Voice voicemail, without using a new number. It's brilliant.
• You have full control over your calls. You can record them for later listening, and have them transcribed into text.
• You can screen callers. You can block numbers, or have callers record their names for your approval. You can have certain contacts only forwarded to certain phones,

Each of these features is compelling enough on its own—together, they'll totally change how you use your phones, changing you from a mere mobile customer to a full-on switchboard operator, self-spy, info hoarder and telco executive. It's like you run your own little phone company, just for yourself. For free. Spectacular.

The Catch(es)

Now that I’ve got you all riled, it’s time for me to pour an icy bucket of water down the front of your pants. Google Voice, as incredible a concept and service as it is, isn’t perfect. In fact, there are a few things you need to know and accept before taking the dive, and they might be dealbreakers:

• You can't use your own phone number. At least, not in the way you wish you could. In an ideal world, you'd be able to port your old cellphone number to Google Voice, and have that—the digits people have been using to get in touch with you for years—be your new all-inclusive point of contact. You can't do this yet. For now, the closest you can come is to port your voicemail to Google Voice. That means that your T-Mobile, AT&T, Verizon or Sprint number's voicemail can be outsourced to Google, but not its calls. You can unify all your phones under your new Google Voice number, but that means you have to switch. Along with the basic inconvenience of telling everyone about your new number, you’re trusting an awful lot in a beta service, the terms of which could change quickly and without notice. It’s not something I worry about, but it’s not nothing, either.

• You can’t record calls that you’ve placed, just calls that you’ve received. And every time you initiate recording, Google Voice notifies the other person on the line. This is all makes perfect moral and procedural sense, but just in case you had the impression that there were no limits on your recording abilities, well, there are.

• The mobile app situation isn't ideal. There are apps for Android, BlackBerry, Windows Mobile and iPhone via jailbreak, and they all work. That said, they're not perfect—they can be slow, poorly integrated, glitchy, or hard to figure out. And since they're supposed to replace the dialer on your phone entirely, this isn't wonderful. The online mobile interface is a good fallback for placing calls and sending texts, but navigating to that adds an extra step to any call or text that can get tiresome after a while.

• Lastly, the way American phones work, you’re still going to end up paying for your minutes, somehow. Just because Google Voice says you can make free domestic calls and cheap international calls doesn’t mean that you actually can: in both cases, you need to dial out to Google Voice’s external system in the first place, which means you’re still using your monthly minute allotment. There are ways around this which I’ll discuss later, but Google Voice, as good as it is, isn’t magic.

Discouraged? Don’t be. Google Voice is still well worth you time and effort, and it’s only going to get better. Now, for God’s sake let’s get started already.

The Process

Signing up. This is simultaneously the easiest and most irritating part of Google Voice: It’s still invite only. Lucky for you, “Invite” in this case doesn’t mean you actually have to wait for an individual to select you from the masses; it’s just Google’s way of saying their keeping the signup pace down at manageable levels while the service is still in beta. Just submit your address, after which Google “anticipate[s] that it will be a short wait before you receive your invitation.”

What's a short wait? My invite took about four days. Some come within 48 hours. At worst, they take about two weeks. Lots of you will have already received your invite, and just not done a whole lot with it—you guys can keep reading—while the rest of you should just bookmark this post, and come back to it once you get your invite. Protip: check your spam filters.

—

Ok, hello again, people I was talking to anywhere between two seconds and two weeks ago! How are you? Now that you’ve got your invite, you can log in to your Google Voice Dashboard. It’ll look familiar if you’ve used any Google Service before:

Logging in. Follow your confirmation link, or navigate here. Click around for a while to get a feel for the interface. This is how you’ll manage your phones from now on. It’s liberatingly simple.

Picking your number. You’ll be given a choice of numbers, which you can choose from practically any available area code. Choose wisely: this will be your primary number from here on out. Choosing your first number is free; changing it in the future will cost you $10. Boo, waah, etcetera! But really not a huge deal.

Adding your phones. This is assuming you want to forward a single number to all your phones, which is kind of the point here, so: Go to the Google Voice settings page (up in the upper right-hand corner of the screen. In the first section, called “Phones,” click “Add a Phone” or “Add Another Phone.” Give it a name “My iPhone” and enter its phone number. That’s it.

Now you’ll be given a passcode, which you’ll use to authenticate your existing phone. Clicking “Connect” will call your phone from your Google Voice number, and a friendly robot will ask for you code. Enter it. That’s it!

Setting up your voicemail. Now that the phone is added, it can accept calls directed to your Google Voice number. If the call is ignored, it will forward the voicemail to Google Voice, where it will be stored online. Alternately, if you only want to use Google Voice for voicemail, you can disable the calling feature (by unchecking the box next to the phone), and set up the service to hijack your actual cellphone number’s voicemails—even when the call didn't get routed through Google Voice.

This is much easier that it sounds: Just click “Activate Google Voicemail” next to your newly-added phone, and enter the number they give you exactly as it’s written, symbols and all. Once you “call” that number, you’ll get some kind of message on your phone. On the iPhone, it looks like this.

Your voicemail has been switched—all you need to do now is set up a quick bookmark in your mobile phone to Google Voice, which provides a functional, if sparse, interface for your Google Voice messages. It's like visual voicemail, except through your browser. (Or a mobile app, which I'll get to soon.)

Choosing the rest of your settings. Now you’ll see your phone listed under the “Phones” settings tab. The other tabs contain a few pages of settings for your Google Voice account. How you toggle these is up to you, but here are the most important ones: If you want to forward SMSes to email, you’ll have to enable that in the “Voicemail and SMS” tab; call screening settings are located under the “Calls” tab; and international call credit can be added under the “Billing” tab, from a credit card.

Finding your feet. Take some time to experiment with some of Google Voice's core features now. Place a call using the button at the top left of the Google Voice homepage. Enter your recipient's number, and choose which of your phones you'd like to place the call with. Google Voice will call your phone first, which upon answering will immediately call your recipient's phone, which will think it's getting a call from your new Google Voice number. It might sound odd in writing, but once you see it work, it just kind of clicks. You can also place these calls from the mobile web interface, without a computer. Texting is more direct—you can send those directly from the web interface without any intervention from your phone.

Placing calls. The aforementioned methods is the most obvious, and it will reliably work. It’s a little cumbersome, especially if you’re used to just tapping on a contact and placing a call. Thankfully there are a few more ways to place calls from your phone, and have it routed through Google Voice:

• Apps: This is by far the best way to use Google Voice. Android has an official Google Voice app, as does BlackBerry.These automate the dialing/texting out process, so you don't need to mess with a web interface—you just opt to make some or all of your calls through Google Voice, and the app takes care of the rest. Windows Mobile has unofficial clients that do the job pretty well, as does the Pre, in the App Catalog. iPhone clients are available, but they’re not approved by Apple: You’ll need to jailbreak your phone and install them from Cydia.

• The call-in method: Simply dial your new Google Voice number from your cellphone or landline, press 2 once it’s connected, then enter the number you want to dial. This is less convenient than the web interface method, even, but it’s vital to the next one:

• The contact method: This is a little cheat to automate the aforementioned process. What you’re doing, basically, is saving your Google Voice number, a pause, the number 2 (which selects “call another phone” from the Google Voice automated menu tree), a pause, then your recipient’s number.

Adding a pause is different on each phone—on the iPhone, for example, you need to save a number as a contact, and in the number editing screen, press the "+*#" button at the bottom left of the keypad. The zero will be replaced with a "pause" button, which when pressed inserts a comma into the number. Google is your friend for this one, though most smartphones make the option available in their respective contact editing screens.

• The 406 method: Have the person you want to text send a message to your Google Voice account. When you receive the message, it will be from a number you don't recognize, with the area code 406. It will be labeled with the sending contact's name, and any replies to that number will return to the person who sent them, but the number is completely new. This is a Google Voice alias, which you can use forever: Just save it as part of your friend's contacts—perhaps as a secondary cellphone or a work number, whatever you can remember—and use it as their primary contact number when call through GV.

Sending Texts. Again, using the web interface is a great way to send texts, as are the mobile apps. But the best solution? The 406 trick listed above works for SMSes too.

The Hacks

As you've probably noticed, Google Voice is kind of a loose system—and a system that's ripe for a little gaming. There are two methods that currently work for getting truly unlimited, free calls over Google Voice. This is where things get really interesting. Interesting in a good way for you; interesting in a terrifying way for the phone companies.

• The Calling Circle Method: You know how some carriers let you designate a few contacts that don't count toward your monthly allotment of minutes, like T-Mobile MyFaves, or the AT&T A-List? By making your Google Voice number one of your friends, you can filter all your calls through Google, whether they be free domestic calls or cheap international calls. Once your Google number is added to your circle, making free calls is simply a matter of dialing into your Google Voice number and, using Google's audio menu system, dialing through to your recipient. (The contact method listed above will work too.)

To make incoming calls—including outgoing calls initiated from the Google Voice web interface—free, you'll need to change your Google Voice settings under the "Calls" tab. Select "Display my Google Voice Number" under the "Caller ID (in)" setting, and you're good to go. A full setup guide for the calling circle method can be found here.

Note: Designating Google Voice as one of your preferred contacts may be against your carrier's user policies—check with them if you're concerned.

• The VoIP method: By signing up for a number with free VoIP service Gizmo5 and adding to to your Google Voice account as a phone, you can place unlimited free calls from your VoIP number to landlines. You can also forward the calls through to Skype, if you’d prefer. This isn’t a solution for mobile phones, but it’s a great way to make yourself an effectively unlimited VoIP landline for free. Lifehacker’s got the whole rundown here. UPDATE: Registrations for Gizmo5 have been closed. Sorry!

Easing the Transition

Lifehacker has assembled a fantastic guide for easing the transition from many numbers to one, covering everything from how to convince people not to call your old numbers, to coping with voice latency.

That’s pretty much it! If you have any tips to tricks for getting the most out fo Google Voice, please drop some links in the comments-your feedback is hugely important to our Saturday How To guides.

And if you have any topics you’d like to see covered here, please let me know. Happy Voicing, folks!

The Logitech Harmony 900 is the updated Logitech Harmony One, which marries a traditional button remote with a capacitive touchscreen for expanded functionality. What makes this better are the charging dock and the RF to IR control adapters.

The Price: $400

The Verdict: This form factor, plus the included charging dock and the RF to IR blasters make this the best remote package Logitech has right now. We’ve been fans of their standard remotes for a while, but combining the keep-your-eyes-on-your-tv ability of those with the extendability of their full touchscreen units makes for a winner.

If you've played with the Harmony One you should know what this remote feels like. The number keys are on the bottom, the navigation keys are in the middle and the activity keys are near the top. The touchscreen is responsive enough, and can scroll through pages of various commands for different media console items—just like their previous remotes.

The charging dock is contoured exactly like the back of the remote, taking it in lovingly into its electric arms. Imagine getting into bathtub shaped exactly like your body—this is that, except without the water or the urge to pee.

Syncing with your computer works the same way as before, but Logitech STILL hasn’t managed to enable consolidating profiles so that you can have more than one remote on an account, and hasn’t come up with a way to export remote profiles to other accounts. That’s a huge pain in the ass if you have multiple Logitechs, and is probably our biggest gripe with their setup.

There is one included central RF to IR blaster, with two other IR blasters that can hook up to it for a total of three IR blasters. They're meant to be used in cabinets where the door is closed, or somehow out of IR line of sight, so you can literally point your remote at nothing (it's using RF) and it'll still propagate the command through to the IR blaster. This is pretty easy to set up—there's a wizard right on the remote—and you should be up and running in a few minutes. And there's very little RF delay, so you won't have to worry about that.

The upside is that this is probably our favorite universal remote package that Logitech has made, figuring in the charging dock and the RF to IR blasters. The downside is that the whole setup costs $400. If you’re shopping for your first universal remote, this will probably be your last. if you already own a cheaper Logitech in the sub $100 range, find a way to sell it and pick this up. [Logitech]

Best universal remote by Logitech yet

Allows extendability with touchscreen without sacrificing the usability of buttons

Price is a little high, but less than full touchscreen remotes

The Gadget: Ideative’s Socket Sense surge protector that expands in order to fit more bulky AC adapters all on one strip.

The Price: $29.99

The Verdict: One of the best expandable surge protectors we’ve used yet. It’s incredibly useful on road trips (CES) as well as at home, and beats even the Power Squid in our eyes in a general comparison.

The special thing about Socket Sense is that it can be expanded from 13 to 18 inches and has 6 angled outlets, allowing you to fit more adapters on one strip. Because of this, the Socket Sense is significantly bigger than a lot of other power protectors—fully extended, it is the length of a 5'4'' female's arm—and weighs a lot more too.

However, compared to squid outlets, the design and size of the Socket Sense gives it a heavy, flat bottom, which makes it easier to use without having to deal with bundled up cords and cables all over the place. Moreover, surge protector allows you to individually extend each outlet when needed, allowing you to adjust how much space it takes up to some extent. Also, there is enough tension on extender so that the strip doesn’t flimsily slide open or close, but it doesn’t give off so much resistance that a relatively weak girl can’t extend it easily.

Overall, Socket Sense is a reliable piece of hardware for those who need a power strip that offers more space between each adapter. It has 2160 joules of surge protection, compared to the 540 joules of the $30 power squid (the $50 squid offers 1080 joules and the $70 squid offers 3240 joules). For $30, it’s hard to find a better overall surge protector with this amount of space per socket, although the EZSpace UFO is pretty good as well. [Ideative]

Large enough to allow you to plug in six of just about anything in the strip

Slightly larger than a normal power strip

Slightly pricier than a normal strip at $30

The iPhone 3G unlock is now available. The unlocking software is called yellowsn0w, runs as an invisible application, and it’s very easy to install. Here’s how. Updated 3: Now works for me with 0.9.4.

Yellowsn0w, the iPhone 3G unlock, runs as a small command line application that gets installed in any jailbroken iPhone 3G using Installer. It’s very easy to install:

• First, update your iPhone 3G to the latest iPhone OS provided by Apple using the latest iTunes.

• Then, use QuickPwn 2.2 to jailbreak and activate your iPhone 3G. If you have Mac OS X 10.5.6 installed, you should follow these instructions before doing it.

• Use Installer or Cydia to install yellowsn0w, which is completely free. Here are the addresses you have to use to add yellowsn0w to your installer application:

For Cydia enter: http://apt9.yellowsn0w.com/
For Installer enter: http://i.yellowsn0w.com/

• That’s it. There are some special SIM cards that give problems, but f you have a normal SIM card from any non-official carrier, you are fine.

BEWARE: This is a beta application—version 0.9.1— so install at your own risk—I’m installing, it, though. Since it’s a daemon which doesn’t alter anything permanently, it seems safe. Just proceed with caution and be warned.

Update: I’ve been trying to get this to run all day. The installation is very easy. Getting it to work right is a completely different matter.

After reboot, the iPhone won’t pick my Vodafone carrier (the Vodafone SIM card works fine in an iPhone first generation, unlocked with the old unlock). It will just sit there, idle. Won’t give any error, but it won’t connect to the carrier network.

My iPhone 3G has the 2.28 baseband, as it should, and has been Quickpwned for the first time to do the unlock. Installer and Cydia are there, working fine. I’ve carefully followed the instructions in their page—about getting out the SIM card for a minute, then get it back in (and all other possible combinations)—but it just won’t fly.

Like they say, this is beta. It won’t damage your iPhone—in theory—but it may or may not run. It seems like there are other reports of the same, as well as other people talking about losing the network connection.

Even while this is labeled as a beta, it saddens me that the iPhone Dev Team has embraced the damn beta culture just to make the release on a cute date. It looks like the old days of solid versions are long gone by.

Update 2: There’s a poll here with people saying if it works or not. At the time of this writing, these were the stats:

It worked: 23 34.33%
It doesn’t work: 44 65.67%
Voters: 67.

Hopefully, a more stable and predictable release will come soon. Until then, I will keep trying. If you have any reports, drop me a line via email.

Update 3: iPhone Dev Team has released version 0.9.4. After some magic moves in the terminal, it worked for me. My iPhone 3G is now working in Spain in the Vodafone network. [IPhone Dev Team]

The Mac OS X 10.5.6 update broke pwnage, the unlocking/jailbreaking program for the iPhone. Fortunately, there’s now an easy solution to fix this problem. You just need an Automator script and these simple instructions.

You first need to be logged into the Mac with administrator privileges and, when asked, you have to provide with the administrator password.

Yes, it’s that easy. Enjoy. [Get the script here or here via Hackintosh]

They did it again: iPhone Dev Team has unlocked the iPhone 3G. They are now packaging the user-friendly software for a December 31 release.

While it took a little longer than the free iPhone EDGE unlock, it does sound like this is the real deal. The team is claiming a successful unlock—now the next step is to package it up in a user-friendly GUI app like Pwnage Tool.

The only catch is that it will work only with iPhone 3Gs with baseband version 2.11.07 or earlier, and it must be jailbroken. To ensure you preserve an unlockable version of the baseband, the Dev Team has warned against the usage of the QuickPwn jailbreaking tool and against updating via official firmwares without first waiting for Pwnage Tool to work with it. More guidelines for that are here.

Phew, after all this l33t my head is starting to spin, but the good news remains—iPhone 3G unlock is on the way! [Dev Team]

Rumors of a RED DSLR had been confirmed a long time ago, but what of the Scarlet and EPIC übercamcorders? On the REDUser forums, RED CEO Jim Jannard has explained it all: Scarlet and EPIC are the DSLR — all cameras are "part of the same DSMC system", so each and every camera will be part of a modular, build-your-own, still and video product line based on the Scarlet and EPIC 'Brains'. To do this, RED has furnished an insanely diverse new collection of components, with sensors ranging from the $2500 3k Scarlet to the $55,000, 28k EPIC 617 Mysterium Monstro.

The core of the new line is made up of the new ‘Mysterium’ brains, pictured in the gallery above and detailed in the gallery below. These boxy sensors can be built up into 5D-esque DSLRs, compact prosumer camcoders, full-fledged professional video cameras or even a 3D unit with a new line of lenses, flash storage, frames, mounts and other add-ons, outlined with the new sensors below. In addition to their own lenses, the new cameras mercifully support gear built for Nikon and Canon standards with mount adapters, so you don’t have to re-buy all of your optics. In spring, when the first of the new units are intended to ship, RED One users won't be left out in the cold — they'll get purchase credit towards new cameras, or if they'd just like to throw one of the new sensors into their existing rig, credit towards that. I guess this is what Jannard meant when he said RED had a 'new vision'.

For the full release, click here. Warning — comically giant JPEG. [RED]

This is a guide that, if followed, will unchain your Apple TV from its cruel iTunes tether, turning it into the useful living room conduit of music, video and web-based content it should have been all along via the media center software Boxee. Boxee can be installed fairly easily via the ATV’s USB port to bring Hulu and Comedy Central streaming, playback of any video or music file anywhere on your network in virtually any file type imagineable, and a bevy of internet A/V sources like Flickr, Last.fm, NPR and BBC podcasts and tons of others—all upping the usefulness and fun of Apple’s notoriously underachieving box by a factor of 10, easily. If you have an ATV, Boxee is a must-install, and it’s 100% free. Let’s get started.

The stock Apple TV has never been able to decide what it’s supposed to do. Is it a device to store all your videos? Its built-in hard drive would suggest yes, but the fact that everything needs to be piped through iTunes makes this a hassle if you store your videos in any other way. And why are we downloading and storing anyway? Streaming is the way things are headed, and for streaming, Apple TV doesn’t make a ton of sense, especially when a box a quarter its size and a less than half its price can bring Netflix’s massive library into your living room with zero download delays and zero added cost, soon in HD, even.

Aside from adding the golden goose of Hulu streaming, Boxee’s other main advantage is freeing your Apple TV from its direct connection with your iTunes library. No longer will it be necessary to convert all of your video files into iTunes compatible formats to get them to your TV—Boxee will let your Apple TV read just about any video codec you can throw at it (full list of codecs here – only thing it chokes on is 1080p video; 720p works fine) from any computer or network-attached storage device on your network, or read files off the Apple TV’s own hard disk—all while leaving the default OS untouched and 100% functional. So let’s do this.

What You’ll Need:

• Apple TV with software version 2.0 or higher

• A USB flash drive 512MB or larger

• ATV USB Creator [download: 1.0.b7 version - Mac only, for now]

• An invite into Boxee’s semi-public alpha (use this link especially for Giz readers to jump the line a bit)

Prepare Your USB Drive

Just like the iPhone, the Apple TV is basically an OS X computer (running a 1GHz Intel processor), so Boxee installs just like a regular desktop app in the Applications folder, which is hidden normally. Why Apple hasn’t opened up the Apple TV to third party developers is anyone’s guess, but thankfully, with a prepared USB stick it’s all pretty painless.

1. After unpacking the ATV USB Creator application, start it up with the USB flash drive you intend to use mounted. Select “ATV-Patchstic” as your installation option and “Boxee for Mac” as the installation type. At the bottom, select the BSD location of your flash disk. You can find this with System Profiler under the USB section (probably a good idea to unmount any other USB drives so you don’t accidentally wipe them).

2. Click "Create Using ->" and your USB stick will be formatted and loaded up with the appropriate software.

3. Power off your Apple TV (by unplugging it), drop your USB patchstick into the ATV’s USB slot, and plug it back in. You’ll see Tux and a bunch of code streaming on your screen as the software installs.

4. When it’s done, remove the USB stick and restart the ATV.

Download Boxee via the Boxee Launcher

5. The USB patchstick installs a launcher that can then pull down the latest version of Boxee from the web. The first thing you’ll want to do, then, to ensure you have the latest version, is update the launcher itself. Go to the new option “Boxee” in the ATV menu, choose “Update” and then update the Launcher.

6. Now, go to the new Boxee menu and choose "Update" -> "Boxee alpha…" to pull down and install Boxee itself. Once it installs, select "Boxee" from the new menu "Boxee/XBMC" menu to start it up.

Configure Boxee

7. Enter the user account you registered on boxee.tv (via our invite link above). Boxee also adds some nifty social networking features—if you have any buddies also using it, you can see what they’ve recently watched, added to their collections, or recommended to you via Boxee’s home screen.

8. First thing you’ll want to do once you’re in is make sure Boxee displays perfectly on your screen. Settings are accessible by pressing “left” on the ATV remote at any time, so go to “Settings – Appearance – Video Calibration…” to set overscan and sizing options.

Add Your Sources

Right now, under the “Videos” menu, you can browse and stream the complete offerings from Hulu, Comedy Central, Revision3, and a ton of other web video sources. But Boxee really shines when it can play your media files from anywhere on your network.

Add an SMB Share

This can be a network attached storage drive (you’ve read our guide for getting the best NAS setup, right?) or simply a shared folder on a Mac or PC on your network (to share a folder in OS X, enable File Sharing in your Sharing settings, enable SMB shares under “Options” and add your media folder. Boxee will then auto detect your shares.

9. In Boxee's Settings menu, select "Media Sources and Applications -> Network Sources" and choose "Add New Source." Select your share in the menu that comes up and mark it wither Video, Music or Photos. Boxee will now monitor this folder and add any TV shows and movies it recognizes (complete with cover art, episode descriptions, and the like) to the main videos menu (Boxee's full of little surprises like this). It won't catch everything though, so you can always access your added folders manually by choosing "Sources" under the main Video menu.

Access Apple TV via SSH For Copying Media Files

Aside from streaming from SMB shares, Boxee can also of course play files stored locally in its own file system. You can connect to the Apple TV via SSH/SFTP for copying files directly over your network and accessing your Apple TV’s main file system.

10. In an FTP program like Transmit or Cyberduck (but using SFTP), connect to appletv.local with the username and password both set to “frontrow” – this will log you in to your Apple TV’s file system, which has a structure exactly like OS X’s. You can also connect via SSH from the terminal if you prefer the geekier side.

11. In the folder /Users/frontrow you will find folders labeled Movies, Music and Pictures. Any media added to these folders will be automatically recognized and playable after copying.

Torrent RSS

Yeah, Boxee can also download Torrents. It comes with a listing of public domain movie and TV Torrents under the “Public Torrents” source, but you can also have your Apple TV download whatever Torrents you want.

12. To add a Torrent to Boxee’s download manager, simply copy the .torrent file to the Users/frontrow/Library/Application Support/BOXEE/UserData/Torrents folder using the SFTP technique above and it will immediately begin downloading. Awesome.

Uninstalling All Traces of Boxee

Should you want to wipe your machine totally clean of any Boxee related tinkering, it’s easy. Fire up a Terminal and type in the following commands, each on their own line:

ssh frontrow@appletv.local

sudo rm -rf /Applications/Boxee.app/

sudo rm -rf /Applications/XBMC.app/

sudo rm -rf /System/Library/CoreServices/Finder.app/Contents/PlugIns/XBMCLauncher.frappliance/

rm -rf /Users/frontrow/Library/Application\ Support/BOXEE/

rm -rf /Users/frontrow/Library/Application\ Support/XBMC/

What’s Next For Boxee

Boxee is on the move. Over the course of three alphas I’ve used (I can’t believe this is alpha software) over only the last month or so, this thing has improved by incredible bounds—interface is getting better, weirdness and inconsistencies getting less common, all good signs.

Eventually, Boxee wants to be in set top boxes and on every platform (Windows is coming before the end of the year)—since it supports practically every audio and video codec known, it’s aiming to be the Firefox of multi-platform connected AV setups, featuring plug-ins and add-ons of its own. It doesn’t support DRM of any kind, so don’t hold your breath for Boxee to be picked up by any of the majors. Fine with me.

Feature wise, Netflix streaming (yessss) and ABC.com are first on the Boxee folks’ list.

Boxee’s an open source app, so its forums are a lively place to ask for help and suggest more features to the main developers, who hang out there often. If you run into any bumps, that’s the place.

The first Android phone is dropping next week, and the people who pick it up will be toting around mobile Google software in their pocket wherever they go. They’ll be using mobile Google apps, probably in concert with using Gmail, Gcal and Google Maps on their normal computer. We know that Google is tossing out all user data after 9 months, but you’ve got to wonder what kind of a picture Google is getting of its heavy users like that when it’s only getting info from how its apps are used. After the jump, an imagined day in the life of a Google user, as recorded and perceived by the Googleplex itself.

07:36:04: Application — Gmail
User reads 1 new emails
Keywords: dinner, match.com, reply, date

Current Demographic Profile: Single Male/Female

07:43:38: Application — Search
Search Term: italian restaurant upper east side manhattan
Search Term: italian restaurant upper east side manhattan cheap
Search Term: creampies

Current Demographic Profile: Single Male New Yorker

08:31:17: Application — Gmail
User sends 1 new email
Keywords: dinner, meet, Ford Fiesta

Current Demographic Profile: Single Male New Yorker, Low Income

08:40:03: Application — Search
Search Term: vern troyer sex tape

Current Demographic Profile: Single Male New Yorker, Low Income, Midget Fetishist

11:01:12: Application — Google Reader
Feed read: Gizmodo
Feed read: Kotaku
Feed read: Cute Overload
Feed read: Gothamist
Feed read: Gizmodo
Feed read: Kottke
Feed read: Boing Boing
Feed read: Fleshbot

Current Demographic Profile: Single Male New Yorker, Low Income, Midget Fetishist, Cubicle Dweller

12:14:30: Application — Google Maps Mobile
Search Term: SuperCuts
Near: Current Location

Current Demographic Profile: Single Male New Yorker, Low Income, Midget Fetishist, Cubicle Dweller, Cheapskate

12:59:08: Application — Mobile Search
Search Term: slimming pants

Current Demographic Profile: Single Male New Yorker, Low Income, Midget Fetishist, Cubicle Dweller, Cheapskate, Insecure

13:01:56: Application — Google Maps Mobile
Search Term: H&M
Near: Current Location

Current Demographic Profile: Single Male New Yorker, Low Income, Midget Fetishist, Cubicle Dweller, Cheapskate, Insecure, Trendy

13:42:12: Application — Google Maps Mobile
Search Term: Florist
Near: Current Location

Current Demographic Profile: Single Male New Yorker, Low Income, Midget Fetishist, Cubicle Dweller, Cheapskate, Insecure, Trendy, Unimaginative

14:19:31: Application — Search
Search Term: dating tips
Search Term: first dates
Search Term: halitosis cure
Search Term: bang bus

Current Demographic Profile: Single Male New Yorker, Low Income, Midget Fetishist, Cubicle Dweller, Cheapskate, Insecure, Trendy, Unimaginative, Virgin

14:55:00: Application — GCal
Reminder: Sales Meeting in Five Minutes Sent via: Text

Current Demographic Profile: Single Male New Yorker, Low Income, Midget Fetishist, Cubicle Dweller, Cheapskate, Insecure, Trendy, Unimaginative, Virgin, Boring Job Holder

17:13:49: Application — Google Reader
Feed read: Gizmodo
Feed read: Fleshbot

Current Demographic Profile: Single Male New Yorker, Low Income, Midget Fetishist, Cubicle Dweller, Cheapskate, Insecure, Trendy, Unimaginative, Virgin, Boring Job Holder, Porn Addict

18:51:10: Application — Google Maps Mobile
Start Location: Current Location
End Location: Olive Garden

Current Demographic Profile: Single Male New Yorker, Low Income, Midget Fetishist, Cubicle Dweller, Cheapskate, Insecure, Trendy, Unimaginative, Virgin, Boring Job Holder, Porn Addict, Fat, Not Italian

19:15:03: Application — Mobile Gmail
User sends 1 new email
Keywords: date, forgot, still here

Current Demographic Profile: Single Male New Yorker, Low Income, Midget Fetishist, Cubicle Dweller, Cheapskate, Insecure, Trendy, Unimaginative, Virgin, Boring Job Holder, Porn Addict, Fat, Not Italian, Pathetic

19:20:41: Application — Mobile Gmail
User reads 0 new emails

Current Demographic Profile: Single Male New Yorker, Low Income, Midget Fetishist, Cubicle Dweller, Cheapskate, Insecure, Trendy, Unimaginative, Virgin, Porn Addict, Fat, Not Italian, So Pathetic

19:26:11: Application — Mobile Gmail
User reads 0 new emails

Current Demographic Profile: Single Male New Yorker, Low Income, Midget Fetishist, Cubicle Dweller, Cheapskate, Insecure, Trendy, Unimaginative, Virgin, Porn Addict, Fat, Not Italian, So Pathetic, Desperate

19:31:55: Application — Mobile Gmail
User reads 0 new emails

Current Demographic Profile: Single Male New Yorker, Low Income, Midget Fetishist, Cubicle Dweller, Cheapskate, Insecure, Trendy, Unimaginative, Virgin, Porn Addict, Fat, Not Italian, So Pathetic, So Desperate

19:40:21: Application — Google Maps Mobile
Search Term: Strip Club
Near: Current Location

Current Demographic Profile: Benny Goldman

When we first heard about EFiX—a simple USB dongle that'll let you magically install Leopard on your PC—it sounded too fantastic to be true. Well, I used it to turn my gaming PC into a Mac Pro over the weekend, and I’m somewhat amazed to say this, but it works perfectly.

I grabbed all the updates straight from Apple—including 10.5.5 last night, so you don't have to wait for a hacked patch like you would running a typical Hackintosh—installed a whole bunch of software and have been using it for several days. It runs beautifully, just like a real Mac Pro.

The Process
There are, of course, rules you have to adhere to, as there tends to be when using black magic. The major one with EFiX, and its only real “catch,” is that you have to use the supported hardware, not a very long list indeed. But outside of the Gigabyte motherboard requirement (reportedly some Asus boards using a P45 chipset also work), it’s actually fairly generic. I just happened to have everything on the list.

If you've got the hardware, the whole process is simple, so that even if you've never cracked your desktop before, you could still get this done with a quick search online for the requisite know-how. I plugged the EFiX dongle into a USB header on my motherboard—not, as you might have assumed, to a USB port on the outside. That's really it for getting your hands dirty, though. I restarted my computer, selected EFiX as the boot device—it was listed under hard drives, actually—and was greeted with a drive selector. After selecting the Leopard disc, it started installing without a hitch.

Okay, there was a slight hitch. My video card, an Nvidia 8800GT, isn’t supported by the firmware EFiX ships with. EFiX already has the update on the site, but its updater is only coded for 32-bit Windows. If, like me, you run Vista 64-bit, you will have to install Vista 32-bit on the drive you intend to put Leopard on, just to update the stupid firmware.

After I did that, everything was peachy. The only slight inconsistency is that my 8800GT shows up as a 256MB card, when it’s actually a 512MB card, and my 1066MHz RAM is only running at 800MHz apparently. But that’s sorta trivial.

The Numbers
Here are some benchmarks compared to some numbers Adam over at Lifehacker ran for his Hacktinosh vs. a MacBook Pro and Mac Pro. Obviously, my hardware is newer—a 3GHz E8400 Wolfdale Core 2 Duo, 4GB RAM (running at the slower 800MHz, rather than 1066MHz) and an Nvidia 8800 GT (with the OS only recognizing half of the memory). The total guts of my computer cost just under $800 when I put it together in May, hard drive included. (Mac Pros start at $2,300.)

Day to Day
One thing to keep in mind is that EFiX has to interlope every time you want to boot to Leopard, so a cold boot takes at least two minutes, between booting to EFiX, picking Leopard, then loading it up. And when you go into Windows, EFiX will show up as an attached USB drive. These aren’t dealbreakers—once you’re up, performance is great. Overall, the experience is really incredible for how smooth and seamless it is. Updates, installing software, everything is just like a real Mac. The best way to put it is this: I’ve got a Mac Pro now.

I occasionally feel like Windows is running just a smidge more slowly, but benchmarks compared to before I installed EFiX don’t support that creeping feeling, so I chalk it up to paranoia.

Is the dongle worth $170? That's a personal question. Do you wanna go through the usually more complicated—but free—Hackintosh process? Perhaps the best way to look at it is this: If you've already got the supported hardware, it's like buying a Mac for $170, since you can still have your trusty PC just a restart away on the same machine. Also, even as simplified as it is, you still need to know what you're doing. There's no official tech support, though there is a very active forum that provides helpful answers to queries.

Updated: EFiX USA is handing all of the distribution in the US for E-FiX.com, who actually doesn’t do any of that. They were selling units on eBay but their main site looks like it’s up now. So far in our dealings with the company (who sent us EFiX to review) we haven’t had any reason to think they’re scamming anyone, but it’s understandable if you wanna approach this with caution. [EFiX, EFiX USA]