As expected, it didn’t take long for the QuickPwn team to jailbreak the iPhone 2.2.1 firmware. QuickPwn is available now for the iPhone and the iPod Touch. [QuickPwn via Lifehacker]

The iPhone 3G unlock is now available. The unlocking software is called yellowsn0w, runs as an invisible application, and it’s very easy to install. Here’s how. Updated 3: Now works for me with 0.9.4.

Yellowsn0w, the iPhone 3G unlock, runs as a small command line application that gets installed in any jailbroken iPhone 3G using Installer. It’s very easy to install:

• First, update your iPhone 3G to the latest iPhone OS provided by Apple using the latest iTunes.

• Then, use QuickPwn 2.2 to jailbreak and activate your iPhone 3G. If you have Mac OS X 10.5.6 installed, you should follow these instructions before doing it.

• Use Installer or Cydia to install yellowsn0w, which is completely free. Here are the addresses you have to use to add yellowsn0w to your installer application:

For Cydia enter: http://apt9.yellowsn0w.com/
For Installer enter: http://i.yellowsn0w.com/

• That’s it. There are some special SIM cards that give problems, but f you have a normal SIM card from any non-official carrier, you are fine.

BEWARE: This is a beta application—version 0.9.1— so install at your own risk—I’m installing, it, though. Since it’s a daemon which doesn’t alter anything permanently, it seems safe. Just proceed with caution and be warned.

Update: I’ve been trying to get this to run all day. The installation is very easy. Getting it to work right is a completely different matter.

After reboot, the iPhone won’t pick my Vodafone carrier (the Vodafone SIM card works fine in an iPhone first generation, unlocked with the old unlock). It will just sit there, idle. Won’t give any error, but it won’t connect to the carrier network.

My iPhone 3G has the 2.28 baseband, as it should, and has been Quickpwned for the first time to do the unlock. Installer and Cydia are there, working fine. I’ve carefully followed the instructions in their page—about getting out the SIM card for a minute, then get it back in (and all other possible combinations)—but it just won’t fly.

Like they say, this is beta. It won’t damage your iPhone—in theory—but it may or may not run. It seems like there are other reports of the same, as well as other people talking about losing the network connection.

Even while this is labeled as a beta, it saddens me that the iPhone Dev Team has embraced the damn beta culture just to make the release on a cute date. It looks like the old days of solid versions are long gone by.

Update 2: There’s a poll here with people saying if it works or not. At the time of this writing, these were the stats:

It worked: 23 34.33%
It doesn’t work: 44 65.67%
Voters: 67.

Hopefully, a more stable and predictable release will come soon. Until then, I will keep trying. If you have any reports, drop me a line via email.

Update 3: iPhone Dev Team has released version 0.9.4. After some magic moves in the terminal, it worked for me. My iPhone 3G is now working in Spain in the Vodafone network. [IPhone Dev Team]

They did it again: iPhone Dev Team has unlocked the iPhone 3G. They are now packaging the user-friendly software for a December 31 release.

While it took a little longer than the free iPhone EDGE unlock, it does sound like this is the real deal. The team is claiming a successful unlock—now the next step is to package it up in a user-friendly GUI app like Pwnage Tool.

The only catch is that it will work only with iPhone 3Gs with baseband version 2.11.07 or earlier, and it must be jailbroken. To ensure you preserve an unlockable version of the baseband, the Dev Team has warned against the usage of the QuickPwn jailbreaking tool and against updating via official firmwares without first waiting for Pwnage Tool to work with it. More guidelines for that are here.

Phew, after all this l33t my head is starting to spin, but the good news remains—iPhone 3G unlock is on the way! [Dev Team]

A warning for all you iPhone jailbreak enthusiasts: Apple’s newest OS software update contains quite a stink bomb—10.5.6 disables the Pwnage tool, making you unable to jailbreak or unlock your iPhone or iPod Touch.

The update prevents jailbreaking by disabling the software at the computer level, a step up from what the company usually does: release a firmware update that re-locks the iPhone. Now it’s stopping your Mac from recognizing the device in DFU (device firmware update) mode by inflicting new code on the USB ports on Apple computers.

While the iPhone Dev Team is no doubt working to figure out a new hack around this, some are reporting that the simplest way to work around the update for now is to copy some of the 10.5.5 framework files over the newer ones… or not update. [Information Week and Spaziocellulare]

Once again, anything Apple can make, the enterprising Dev Team can break: the brand-new firmware 2.2 has been jailbroken. QuickPwn should take care of everything, unless you're one of those unfortunate owners of the second-generation iPod touch, in which case you're out of luck at the moment. But everything else seems to be running fine—anybody here broken the new firmware yet? Let us know in the comments. [iPhone Dev, thanks Mehmet!]

This is a guide that, if followed, will unchain your Apple TV from its cruel iTunes tether, turning it into the useful living room conduit of music, video and web-based content it should have been all along via the media center software Boxee. Boxee can be installed fairly easily via the ATV’s USB port to bring Hulu and Comedy Central streaming, playback of any video or music file anywhere on your network in virtually any file type imagineable, and a bevy of internet A/V sources like Flickr, Last.fm, NPR and BBC podcasts and tons of others—all upping the usefulness and fun of Apple’s notoriously underachieving box by a factor of 10, easily. If you have an ATV, Boxee is a must-install, and it’s 100% free. Let’s get started.

The stock Apple TV has never been able to decide what it’s supposed to do. Is it a device to store all your videos? Its built-in hard drive would suggest yes, but the fact that everything needs to be piped through iTunes makes this a hassle if you store your videos in any other way. And why are we downloading and storing anyway? Streaming is the way things are headed, and for streaming, Apple TV doesn’t make a ton of sense, especially when a box a quarter its size and a less than half its price can bring Netflix’s massive library into your living room with zero download delays and zero added cost, soon in HD, even.

Aside from adding the golden goose of Hulu streaming, Boxee’s other main advantage is freeing your Apple TV from its direct connection with your iTunes library. No longer will it be necessary to convert all of your video files into iTunes compatible formats to get them to your TV—Boxee will let your Apple TV read just about any video codec you can throw at it (full list of codecs here – only thing it chokes on is 1080p video; 720p works fine) from any computer or network-attached storage device on your network, or read files off the Apple TV’s own hard disk—all while leaving the default OS untouched and 100% functional. So let’s do this.

What You’ll Need:

• Apple TV with software version 2.0 or higher

• A USB flash drive 512MB or larger

• ATV USB Creator [download: 1.0.b7 version - Mac only, for now]

• An invite into Boxee’s semi-public alpha (use this link especially for Giz readers to jump the line a bit)

Prepare Your USB Drive

Just like the iPhone, the Apple TV is basically an OS X computer (running a 1GHz Intel processor), so Boxee installs just like a regular desktop app in the Applications folder, which is hidden normally. Why Apple hasn’t opened up the Apple TV to third party developers is anyone’s guess, but thankfully, with a prepared USB stick it’s all pretty painless.

1. After unpacking the ATV USB Creator application, start it up with the USB flash drive you intend to use mounted. Select “ATV-Patchstic” as your installation option and “Boxee for Mac” as the installation type. At the bottom, select the BSD location of your flash disk. You can find this with System Profiler under the USB section (probably a good idea to unmount any other USB drives so you don’t accidentally wipe them).

2. Click "Create Using ->" and your USB stick will be formatted and loaded up with the appropriate software.

3. Power off your Apple TV (by unplugging it), drop your USB patchstick into the ATV’s USB slot, and plug it back in. You’ll see Tux and a bunch of code streaming on your screen as the software installs.

4. When it’s done, remove the USB stick and restart the ATV.

Download Boxee via the Boxee Launcher

5. The USB patchstick installs a launcher that can then pull down the latest version of Boxee from the web. The first thing you’ll want to do, then, to ensure you have the latest version, is update the launcher itself. Go to the new option “Boxee” in the ATV menu, choose “Update” and then update the Launcher.

6. Now, go to the new Boxee menu and choose "Update" -> "Boxee alpha…" to pull down and install Boxee itself. Once it installs, select "Boxee" from the new menu "Boxee/XBMC" menu to start it up.

Configure Boxee

7. Enter the user account you registered on boxee.tv (via our invite link above). Boxee also adds some nifty social networking features—if you have any buddies also using it, you can see what they’ve recently watched, added to their collections, or recommended to you via Boxee’s home screen.

8. First thing you’ll want to do once you’re in is make sure Boxee displays perfectly on your screen. Settings are accessible by pressing “left” on the ATV remote at any time, so go to “Settings – Appearance – Video Calibration…” to set overscan and sizing options.

Add Your Sources

Right now, under the “Videos” menu, you can browse and stream the complete offerings from Hulu, Comedy Central, Revision3, and a ton of other web video sources. But Boxee really shines when it can play your media files from anywhere on your network.

Add an SMB Share

This can be a network attached storage drive (you’ve read our guide for getting the best NAS setup, right?) or simply a shared folder on a Mac or PC on your network (to share a folder in OS X, enable File Sharing in your Sharing settings, enable SMB shares under “Options” and add your media folder. Boxee will then auto detect your shares.

9. In Boxee's Settings menu, select "Media Sources and Applications -> Network Sources" and choose "Add New Source." Select your share in the menu that comes up and mark it wither Video, Music or Photos. Boxee will now monitor this folder and add any TV shows and movies it recognizes (complete with cover art, episode descriptions, and the like) to the main videos menu (Boxee's full of little surprises like this). It won't catch everything though, so you can always access your added folders manually by choosing "Sources" under the main Video menu.

Access Apple TV via SSH For Copying Media Files

Aside from streaming from SMB shares, Boxee can also of course play files stored locally in its own file system. You can connect to the Apple TV via SSH/SFTP for copying files directly over your network and accessing your Apple TV’s main file system.

10. In an FTP program like Transmit or Cyberduck (but using SFTP), connect to appletv.local with the username and password both set to “frontrow” – this will log you in to your Apple TV’s file system, which has a structure exactly like OS X’s. You can also connect via SSH from the terminal if you prefer the geekier side.

11. In the folder /Users/frontrow you will find folders labeled Movies, Music and Pictures. Any media added to these folders will be automatically recognized and playable after copying.

Torrent RSS

Yeah, Boxee can also download Torrents. It comes with a listing of public domain movie and TV Torrents under the “Public Torrents” source, but you can also have your Apple TV download whatever Torrents you want.

12. To add a Torrent to Boxee’s download manager, simply copy the .torrent file to the Users/frontrow/Library/Application Support/BOXEE/UserData/Torrents folder using the SFTP technique above and it will immediately begin downloading. Awesome.

Uninstalling All Traces of Boxee

Should you want to wipe your machine totally clean of any Boxee related tinkering, it’s easy. Fire up a Terminal and type in the following commands, each on their own line:

ssh frontrow@appletv.local

sudo rm -rf /Applications/Boxee.app/

sudo rm -rf /Applications/XBMC.app/

sudo rm -rf /System/Library/CoreServices/Finder.app/Contents/PlugIns/XBMCLauncher.frappliance/

rm -rf /Users/frontrow/Library/Application\ Support/BOXEE/

rm -rf /Users/frontrow/Library/Application\ Support/XBMC/

What’s Next For Boxee

Boxee is on the move. Over the course of three alphas I’ve used (I can’t believe this is alpha software) over only the last month or so, this thing has improved by incredible bounds—interface is getting better, weirdness and inconsistencies getting less common, all good signs.

Eventually, Boxee wants to be in set top boxes and on every platform (Windows is coming before the end of the year)—since it supports practically every audio and video codec known, it’s aiming to be the Firefox of multi-platform connected AV setups, featuring plug-ins and add-ons of its own. It doesn’t support DRM of any kind, so don’t hold your breath for Boxee to be picked up by any of the majors. Fine with me.

Feature wise, Netflix streaming (yessss) and ABC.com are first on the Boxee folks’ list.

Boxee’s an open source app, so its forums are a lively place to ask for help and suggest more features to the main developers, who hang out there often. If you run into any bumps, that’s the place.

The iPhone syncs great with one computer, but what if you use two? Say you listen to music and watch movies on a home computer while managing all of your important business contacts on your work computer? If you’re willing to get your hands dirty with a hex editor and a few lines of simple code, you can sync your iPhone to multiple systems. Does that sound hard? It’s really not, promise. The tutorial is quite specific. [Shiny Things (how to) via Lifehacker]

If $100 is just too much for you to pay for a homemade iPhone stand, then this paperclip version might be a better option. And to anyone who has ever paid more than 50 cents to hold any pocket electronic, hopefully this fan-made pwnage will keep your money in your pocketbook/child savings accounts next time. [via Lifehacker]

When we first heard about EFiX—a simple USB dongle that'll let you magically install Leopard on your PC—it sounded too fantastic to be true. Well, I used it to turn my gaming PC into a Mac Pro over the weekend, and I’m somewhat amazed to say this, but it works perfectly.

I grabbed all the updates straight from Apple—including 10.5.5 last night, so you don't have to wait for a hacked patch like you would running a typical Hackintosh—installed a whole bunch of software and have been using it for several days. It runs beautifully, just like a real Mac Pro.

The Process
There are, of course, rules you have to adhere to, as there tends to be when using black magic. The major one with EFiX, and its only real “catch,” is that you have to use the supported hardware, not a very long list indeed. But outside of the Gigabyte motherboard requirement (reportedly some Asus boards using a P45 chipset also work), it’s actually fairly generic. I just happened to have everything on the list.

If you've got the hardware, the whole process is simple, so that even if you've never cracked your desktop before, you could still get this done with a quick search online for the requisite know-how. I plugged the EFiX dongle into a USB header on my motherboard—not, as you might have assumed, to a USB port on the outside. That's really it for getting your hands dirty, though. I restarted my computer, selected EFiX as the boot device—it was listed under hard drives, actually—and was greeted with a drive selector. After selecting the Leopard disc, it started installing without a hitch.

Okay, there was a slight hitch. My video card, an Nvidia 8800GT, isn’t supported by the firmware EFiX ships with. EFiX already has the update on the site, but its updater is only coded for 32-bit Windows. If, like me, you run Vista 64-bit, you will have to install Vista 32-bit on the drive you intend to put Leopard on, just to update the stupid firmware.

After I did that, everything was peachy. The only slight inconsistency is that my 8800GT shows up as a 256MB card, when it’s actually a 512MB card, and my 1066MHz RAM is only running at 800MHz apparently. But that’s sorta trivial.

The Numbers
Here are some benchmarks compared to some numbers Adam over at Lifehacker ran for his Hacktinosh vs. a MacBook Pro and Mac Pro. Obviously, my hardware is newer—a 3GHz E8400 Wolfdale Core 2 Duo, 4GB RAM (running at the slower 800MHz, rather than 1066MHz) and an Nvidia 8800 GT (with the OS only recognizing half of the memory). The total guts of my computer cost just under $800 when I put it together in May, hard drive included. (Mac Pros start at $2,300.)

Day to Day
One thing to keep in mind is that EFiX has to interlope every time you want to boot to Leopard, so a cold boot takes at least two minutes, between booting to EFiX, picking Leopard, then loading it up. And when you go into Windows, EFiX will show up as an attached USB drive. These aren’t dealbreakers—once you’re up, performance is great. Overall, the experience is really incredible for how smooth and seamless it is. Updates, installing software, everything is just like a real Mac. The best way to put it is this: I’ve got a Mac Pro now.

I occasionally feel like Windows is running just a smidge more slowly, but benchmarks compared to before I installed EFiX don’t support that creeping feeling, so I chalk it up to paranoia.

Is the dongle worth $170? That's a personal question. Do you wanna go through the usually more complicated—but free—Hackintosh process? Perhaps the best way to look at it is this: If you've already got the supported hardware, it's like buying a Mac for $170, since you can still have your trusty PC just a restart away on the same machine. Also, even as simplified as it is, you still need to know what you're doing. There's no official tech support, though there is a very active forum that provides helpful answers to queries.

Updated: EFiX USA is handing all of the distribution in the US for E-FiX.com, who actually doesn’t do any of that. They were selling units on eBay but their main site looks like it’s up now. So far in our dealings with the company (who sent us EFiX to review) we haven’t had any reason to think they’re scamming anyone, but it’s understandable if you wanna approach this with caution. [EFiX, EFiX USA]

Just released yesterday, iPhone Modem for the Cydia jailbreak application repository promises tethering your laptop to your iPhone in just 10 seconds. We haven’t gotten around to jailbreaking our own yet, but this one is supposedly even easier than the official NetShare tethering app in the official App Store. ModMyiPhone forum says it works just fine on both the MacBook and MacBook Pro. Careful using this on AT&T, since too much tethering data usage you're not actively "paying" for will get you neutered. [modmyiphone]